Cold Water Tanks & Boosters: Integrated Bulk Storage & Pressure Solutions
For any commercial facility, the storage and distribution of wholesome water is a primary operational requirement. Cold water tanks and boosters work in tandem to provide a “break” between the municipal mains and your building’s internal outlets. At Flair Facilities, we specialise in the turnkey management of water storage infrastructure, ensuring your site maintains a compliant, high-pressure supply while strictly adhering to ACOP L8 water hygiene standards.
The Necessity of Modern Cold Water Storage
In large London developments, relying solely on mains pressure is a risk to business continuity. We install and maintain GRP (Glass Reinforced Plastic) sectional and one-piece tanks that provide a vital reserve for your facility.
- Volume Management: We calculate your building’s “Peak Demand” to ensure your storage capacity can handle high-usage periods without depleting.
- Hydraulic Synergy: These tanks act as the “Break Tank” for your Booster Pumps, ensuring your high-pressure pumps always have a flooded suction and never run dry.
- BMS Monitoring: We integrate ultrasonic level sensors into your BMS Integration & Smart Building, providing real-time alerts for low water levels or potential overflows.
High-Performance Boosting Systems
Once water is stored, it must be moved. We integrate our storage solutions with advanced Water Pressure Solutions to deliver consistent flow to every tap, shower, and Commercial Kitchen & Gas Catering appliance. By utilizing variable-speed Commercial Pumps, we ensure that the pressure remains constant regardless of whether one tap is open or one hundred.
Water Hygiene and ACOP L8 Compliance
Stagnant water in a storage tank is a primary breeding ground for Legionella. Our Commercial Boiler Repair & Maintenance protocols for Water & Pressure Systems are built around safety and hygiene:
- Tank Cleaning & Disinfection: Periodic chlorination and physical scrubbing to eliminate biofilm and bacterial growth.
- Temperature Monitoring: Ensuring cold water remains below 20 °C to inhibit bacterial proliferation.
- Insulation Integrity: We apply high-grade Thermal Insulation for Pipes & Plant to all tanks and pipework to prevent “thermal gain” from the surrounding plant room environment.
Structural Protection and Lagging
Tanks and their associated Plant Room Pipework Installation are prone to condensation and environmental wear. We protect your investment through:
- Anti-Sweat Insulation: Using Phenolic Insulation Systems or nitrile rubber to prevent condensation from dripping onto electrical control panels or the Pressurisation Units hardware.
- External Defence: For rooftop tanks, we provide Custom Steel Cladding and PVC Jacketing Systems to protect against UV degradation and winter freezing.
- Valve Maintenance: We service the equilibrium ball valves and delayed-action float valves that control the tank’s refill, preventing “water hammer” in your Commercial & Industrial Pipework.
Why Partner with Flair for Water Infrastructure?
- Principal Contractor Approach: We manage the mechanical installation, the water treatment, and the electrical controls as one seamless project.
- Legislative Expertise: We ensure your installation complies with all WRAS (Water Regulations Advisory Scheme) and HSE requirements.
- Specialist Prep: We perform Safe Preparation for Re-Lagging on all tank manifold pipework to ensure a clean, professional finish.
- Emergency Support: If a tank fails or a booster set locks out, our 24/7 teams respond with the same urgency as an Emergency Boiler Breakdown call.
Cold Water Tanks & Boosters Frequently Asked Questions
This is usually due to poor insulation. Heat from the plant room or sun transfers into the water. We can resolve this by upgrading your Commercial Pipe Lagging and ensuring the tank has a high-quality “Lagging Jacket.”
Yes. We specialise in “Sectional Tank” replacements, where we can build a new GRP tank inside your existing plant room without removing walls or doors. Integrating it seamlessly with your Heating & Chilled Water Pipework, even where access is restricted, before decommissioning the old components.